Description
This is a digital download. You must 3D print and Laser Cut this in order to use it.
This is an acrylic and 3D printed case for the Konami TMNT TMNT Arcade JAMMA PCB. It uses 3D printed corners with brass M5 Inserts pressed in. The acrylic is 5mm thick for the main body and 3mm thick for the top and bottom finishing piece. You can use thinner or thicker material on the finishing pieces if you want.
You will require:
- 6x 10mm long M3 Stand Offs (Female to Female)
- 12x 8mm long M3 screws
- 4x 15mm M5 screws
- 8x M5 threaded inserts with overall outer dimension of 6mm (these are heat pressed into the 3D printed corners).
Includes:
- DXF files for all acrylic parts.
- Solidworks file for the corners to be 3D printed and the 3MF file if you just want to go straight to printing.
Print recommendations: Print the corner braces standing up, use supports on the build plate. I printed with 50% infill, but it was probably a bit overkill.
New Retail: Name Your Own Price. That’s right. If you think this is worth $50 you can pay it. If you think its worth only $1, you can pay that too. Have fun. Make stuff!
You agree to the following when you buy any of my files to use: These files provided as-is, without support. You may freely use them for NON-COMMERCIAL USE only. Basically, use them to make parts for yourself only or send to a shop to get made a couple of as a one off project. Don’t use them and make minor tweaks, call it something else and sell it. If you build, sell, design fight sticks, make replacement parts, or have things on hand to resell and are thinking of adding something from my page to your offerings. Please don’t. That’s not allowed. Have integrity.
Reviews
There are no reviews yet.