Here’s how the Brook UFB/PS4+ SOCD Cleaner works:
V = PRESSED DOWN
SOCD : OPEN (Panzer Default) – See picture below for where J2 is located.
| U | L | D | R | OUTPUT |
| x | x | x | x | Nothing |
| x | x | x | V | RIGHT |
| x | x | V | x | DOWN |
| x | x | V | V | RIGHT + DOWN |
| x | V | x | x | LEFT |
| X | V | x | V | Nothing |
| x | V | V | V | DOWN |
| V | x | x | x | UP |
| V | x | x | V | RIGHT + UP |
| V | x | V | x | UP |
| V | x | V | V | RIGHT + UP |
| V | V | x | x | LEFT + UP |
| V | V | x | V | UP |
| V | V | V | x | LEFT + UP |
| V | V | V | V | UP |
SOCD : J2_4 and J2_5 connected/shorted – See picture below for where J2 is located.
(*) : Second command covers first command, for examples is (←＋→＝→)
| U | L | D | R | OUTPUT |
| x | x | x | x | Nothing |
| x | x | x | V | RIGHT |
| x | x | V | x | DOWN |
| x | x | V | V | RIGHT + DOWN |
| x | V | x | x | LEFT |
| X | V | x | V | (*) |
| x | V | V | V | (*) |
| V | x | x | x | UP |
| V | x | x | V | RIGHT + UP |
| V | x | V | x | (*) |
| V | x | V | V | (*) |
| V | V | x | x | LEFT + UP |
| V | V | x | V | (*) |
| V | V | V | x | (*) |
| V | V | V | V | (*) |
NOTE: THE SOCD DOES NOT OPERATE THE SAME WAY IN LEFT ANALOG OR RIGHT ANALOG STICK MODE. THESE APPLY TO DIRECTION PAD INPUTS (NORMAL) ONLY.
About Author
